For patients with obstructive sleep apnea, one of the most significant steps you can take to improving your health is by getting a Continuous Positive Airway Pressure (CPAP) device.
CPAP is currently the leading therapy for sleep apnea treatment, with several research studies and an endless stream of positive reviews backing its practice.
However, CPAP use does not come without a few quirks.
While most people who try out CPAP machines gain immediate symptom relief, a small section of patients may find the masks quite uncomfortable. It may take several weeks to acclimatize to wearing them.
Then, there is the potential hassle of keeping the device clean. Thankfully, automatic CPAP cleaners like the SoClean now offer a hassle-free alternative that entirely cuts out the potentially burdensome cleaning process.
The peculiar use case of these appliances makes them a potential breeding ground for fungi and bacteria. Hence, to keep your CPAP equipment safe to use, the National Sleep Foundation recommends that you clean and air-dry the water chamber and mask daily, and clean the tubing at least once a week.
Time spent on this laborious cleaning process can add up quickly, placing considerable strain on the patient, often causing non-compliance with the recommended cleaning schedule.
SoClean 2 Review: Overview
When it comes to automatic cleaners for your CPAP device, few options bring as much value as the SoClean 2, one of the top cleaners you can get. The SoClean 2 uses activated oxygen as a dry-cleaning agent, ridding your CPAP device of bacteria and germs without any further input from your end.
Note: Activated oxygen (ozone) is an industry-standard cleaning agent that is 99% effective in combating microbes and mold. Some other top cleaners use a water cleaning system or an ultraviolet light beam to rid your equipment of contaminants and bacteria.
SoClean’s claim to fame is its mix of practical sanitizing and extreme ease of use.
With this cleaner, you get a small, portable setup that connects easily to most CPAP device types. It sanitizes your equipment on autopilot while giving you clear indicators throughout the entire process.
Whether you have a full CPAP mask, a nasal CPAP mask, or a nasal pillow, the SoClean 2 offers one of the best and easiest ways to clean your CPAP. Plus, since it uses activated oxygen, this cleaning method is entirely devoid of any harsh chemicals.
SoClean 2 Features
The SoClean 2 CPAP cleaner uses an activated oxygen cleaning system that sanitizes your masks with ozone. Ozone is one of the top methods for equipment purification in hospitals today. Hence, it is no surprise that it also featured in one of the best cleaners around.
Ozone has a scientifically proven effectiveness against microbes, and independent lab reports quoted on the SoClean website further substantiate this fact. In this study, the results confirmed the SoClean 99,9% efficiency at eradicating bacteria.
The SoClean 2 is compatible with most CPAP masks that are currently in production. However, for some options, you may need an adapter for the cleaner to function properly.
One big plus with getting this brand is that they offer three free adapters with each purchase, making it easy for you to connect your device, even if it is not supported natively. SoClean offers a comprehensive compatibility guide to help you figure out how compatible the cleaner is with your CPAP machine.
Note: If you have CPAP devices like ResMed S9, ResMed Airsense 10, Philips Respironics, Fisher & Paykel ICON, or a Fisher & Paykel 600, you will need a CPAP adapter for the SoClean 2 CPAP equipment cleaner to be compatible.
The SoClean is one of the fastest CPAP cleaners on the market, with cleaning cycles that typically last under 12 minutes. The device has a preset for seven minutes that should be sufficient for most CPAP devices, but you can adjust the timing to match your needs.
For CPAP devices that do not use a humidifier, you can even go lower than the preset, setting the cleaner to a 3-5-minute cycle, as these devices have a far less chance of developing mold or bacteria buildup.
However, like with most automatic cleaners, you should avoid using your CPAP device for at least two hours after each cleaning cycle.
Note: With the SoClean, the manufacturer recommends leaving your CPAP mask connected to the cleaner for those two hours after the cleaning cycle ends.
Other key features of the SoClean include:
- The device works with your CPAP machine fully assembled.
- SoClean does not need any water or chemical input.
- Works with AA batteries
- Lightweight and portable
Also, SoClean 2 requires you to change the filter and check the valve every 6 months. Users can also purchase a Cartridge Filter Kit with needed items online, however, sometimes this kit is out of stock and unavailable.
So, for more info make sure to contact the SoClean company directly. The replacement unit costs $30.
At a retail price of almost $300, the SoClean 2 device is on the higher end of the price spectrum. However, with this cleaner, you are getting the best in class, so it’s hard to fault the unsurprisingly premium pricetag.
Nevertheless, the SoClean 2 is eligible for FSA and HSA reimbursement, and you can also use a payment plan as SoClean offers financing via Bread Financing.
With each SoClean two purchase, the manufacturer offers free shipping and a 30-day risk-free trial period that begins from the date of purchase.
Pros & Cons
Just like any device, the SoClean cleaning machine has its advantages and disadvantages. So, before you make a final decision and choose to buy this particular machine, consider the following pros & cons;
- The SoClean 2 has a convenient, automated cleaning system, which allows daily cleaning without hassle and fuss.
- The machine doesn’t require you to disassemble your CPAP equipment before cleaning.
- The machine doesn’t require a water cleaning system and creates simply no mess.
- When using the SoClean machine, you don’t have to fear harsh and harmful cleaning chemicals.
- The machine uses the same cleaning method that is used in hospitals to clean medical equipment, devices, and tools.
- The SoClean 2 is compatible with the equipment of CPAP, APAP and BiPAP machines, and masks of all sizes.
- The machine is user-friendly and easy to use.
- The SoClean cleaning machine is on the higher end of the price spectrum. Compared to other, similar devices, it surely is expensive.
- Customers tend to complain about the odor or the smell after the cleaning process is complete (it is usually very strong and overpowering, which is generally associated with the odor of ozone). Some customers claim they couldn’t use their mask for a week after cleaning it in the SoClean 2.
- The machine requires a valve and filter change every 6 months, which can be a hassle for some people.
- Even though the SoClean removes bacteria and viruses, you still need to remove dust and grimes from your CPAP equipment regularly. However, instead of every day, you can do this once a week while using a CPAP cleaner.
The SoClean 2 CPAP cleaner is one of the most natural options on the market to recommend. Its mix of cleaning effectiveness, ease of use, and wide-ranging compatibility quickly rank it as one of our top-rated cleaners for CPAP devices.
Sure, the device has some convincing disadvantages, but we cannot still portray it as a bad-quality cleaner since ozone odor is generally an issue with people who are not used to it. The advantages outweigh the disadvantages of this cleaner, for sure.